Sonus faber Suprema

Hinta

810 000,00 (sis. alv)

Tämän tuotteen voit ostaa tai tilata myymälästämme. Kysy lisää, pyydä tarjous, ota yhteyttä!

Sonus faber Suprema on Vicenzalaisvalmistajan kaikkien aikojen kunniahimoisin ja upein kaiutinjärjestelmä, joka tuottaa taivaallisen ääninautinnon intohimoisen musiikinystävän sydämeen. Sonus faberin 40-vuotisjuhlien kunniaksi.

Kaksi kaiutinyksikköä 4,5-tie rakenteella ja kaksi bassoyksikköä. Erillinen jakosuodinyksikkö.

Saatavissa yhdellä bassoyksiköllä 735000€ hintaan tai täydellisenä kahdella bassoyksiköllä 800000€ hintaan.

Viimeistelyvaihtoehdot red, red violin, wenge, graphite ja walnut

 

UNSURPASSED SOUND

The most ambitious project of Sonus faber to date, Suprema reflects the pinnacle of audio engineering. Building on a legacy of artisanal design and a relentless pursuit of perfection, Suprema honors the 40th anniversary of a brand dedicated to pushing the boundaries of audio excellence.

EXTENDING BEYOND CONVENTIONAL LIMITS

Suprema consists of a sophisticated four column system— two main columns and two subwoofers, and an external electronic crossover. This new design was pioneered by Sonus faber’s engineering team to enhance acoustic performance to new levels of excellence.

LEGACY REDESIGNED

The two main columns of Suprema take the signature Sonus faber lute shape, originally introduced with Guarneri in 1993.

This iconic design represents the optimal solution for enhancing a virtual soundstage while blending seamlessly into the background. The two subwoofers, in contrast, take on Stradivari’s elliptical shape, which is most suitable for the reproduction of low frequencies.

AN INNOVATIVE COMBINATION OF DRIVERS

Each of the two main columns of Suprema is a 4.5 ways system, featuring 2 back-firing speakers in addition to 8 front-firing speakers— 4 dual drive woofers, 1 mid-woofer, 1 Camelia midrange, 1 mid-tweeter, 1 super tweeter. The back-firing speakers improve staging and dispersion while the combination of front speakers allows for unparalleled audio reproduction at every level of frequency.

VOICE OF SONUS FABER, EVOLVED

In developing Suprema, careful attention was paid to maintaining and enhancing the signature Natural Sound of Sonus faber. The configuration of the tweeters and midranges evolves into three brand new elements: one midrange with a cellulose pulp diaphragm, a new mid-tweeter with a treated silk dome, and a new super tweeter with a treated silk dome.

 

SUPREMA SPECS 
HIGHLIGHTS

System

  • MAIN COLUMN: 4.5 way sealed box
  • SUBWOOFER: Sealed box loading, passive subwoofer

Recommended Amplifier Power

  • MAIN COLUMN: 100 W –700 W
  • SUBWOOFER: 500 W –2000 W

External Crossover

  • Full Discrete –Pure Analog Stereo/Mono active Crossover

Voit ottaa yhteyttä alla olevalla lomakkeella tai soittamalla numeroon 03 2130 750. Vastaamme puhelimeen myymälän aukioloaikoina. Tarkista aukioloajat täältä.

    Liittymällä postituslistallemme saat tuoreimmat kuulumisemme suoraan sähköpostiisi. Voit erota postituslistalta milloin haluat.
  • Kenttä on validointitarkoituksiin ja tulee jättää koskemattomaksi.
System

MAIN COLUMN

SYSTEM

4.5 way sealed box

SUBWOOFER

Sealed box loading, passive subwoofer

CROSSOVER

Full Discrete –Pure Analog Stereo/Mono active Crossover

Loudspeakers

MAIN COLUMN

  • SUPER TWEETER: 20mm silk dome with dedicated waveguide, neodymium magnet
  • TWEETER: 38mm silk dome with dedicated waveguide, neodymium magnet
  • MIDRANGE: 6.5” dual driver motor system with neodymium ring magnet,
  • LINK MIDWOOFER: 8” neodymium slug magnet, Ø 65mm voice coil, sandwich paper cone
  • WOOFERS: 4 x 8” dual driver motor system with neodymium ring magnet, Ø 50mm voice coil, sandwich paper cone
  • BACK EMISSION TW: 28mm silk dome, neodymium magnet
  • BACK EMISSION MD: 4” paper cone driver, neodymium magnet

SUBWOOFER

  • 2 x 38 cm carbon fiber sandwich cone
Crossover Points

MAIN COLUMN

Front emission: 360, 430, 1700, 6700 Hz

Back emission: 500, 2300 Hz

Frequency response

MAIN COLUMN

  • Front emission: 45Hz –40KHz
  • Back emission: 500Hz –20KHz

SUBWOOFER

  • 16 to 30/80 Hz -variable based on the setting of the electronic crossover

CROSSOVER

  • MAIN: 25Hz-150KHz
  • PROC: 5Hz-150KHz
Sensitivity

MAIN COLUMN

91dB 1m/2.83V

SUBWOOFER

92dB 1m/2.83V

Nominal impedance

MAIN COLUMN

4 Ohm

SUBWOOFER

4 Ohm

Audio input

CROSSOVER

INPUT CHANNELS: 2 Unbalanced –2 Balanced

OUTPUT CHANNELS: 8 Unbalanced –8 Balanced

OUTPUT DRIVING CAPABILITY: Unbalanced: 6 V rms (+15,5 dBv) @ 490 Ω / Balanced: 11 V rms (+20 dBv) @ 980 Ω

Recommended amplifier power

MAIN COLUMN

100 W –700 W

SUBWOOFER

500 W –2000 W

Product dimensions (HxWxD)

MAIN COLUMN

1905mm x 650mm x 880mm

75” x 25.6” x 34.65” in

SUBWOOFER

1451 x 850 x 595 mm

57.1 x 33.46 x 23.42 in

CROSSOVER

110 x 451 x 424 mm

4,3 x 17,8 x 17 in

Dimensions with packaging (HxWxD)

MAIN COLUMN

2110x 1200 x 830 mm

47.2 x 32.7 x 83 in

SUBWOOFER

1900 x 100 x 83 mm

39.4 x 32.7 x 84.8 in

Weight

MAIN COUMN

110 kg

242,5 lb

SUBWOOFER

103kg

227 lb

CROSSOVER

17 kg

37,5 lb

Packaging weight

MAIN COLUMN

222 kg

489 lb

SUBWOOFER (WITHOUT CROSSOVER)

221kg

487lb

SUBWOOFER (WITH CROSSOVER)

240kg

529 lb

Mains Input Voltage

CROSSOVER

115V (60 Hz) or 230V (50 Hz), factory-set.

Input impedance

CROSSOVER

  • Unbalanced: 20 kΩ
  • Balanced: 10 kΩ