Pro-Ject Head Box DS2 B

Hinta

Alkuperäinen hinta oli: 629,00€.Nykyinen hinta on: 499,00€. (sis. alv)

Toimitusaika: 6-12 arkipäivää

Head Box DS2 B on balansoitu kuulokevahvistin monipuolisilla säätömahdollisuuksilla. Reilusti tehoa vaativimmillekin kuulokekuormille. Tuplamonorakenne. Neljäasentoinen gain-säätö. Kolmeasentoinen virranannon säätö. Etupaneelissa 6,3mm ja balansoitu 4-pin XLR-ulostulo – yhtäaikaa käytettävissä. Laadukas ALPS blue-potentiometri äänenvoimakkuuden tarkkaan säätämiseen. Musta ja hopea. Lisävarusteena puupäädyt 99€/pari.

 

 High End Balanced Headphone Amp

• Enough power to drive demanding headphones

• Dual mono design principle

• Four gain settings to match any headphone

• Three current settings to deliver best sonics

• Single ended (6.3mm) and balanced (4 Pin XLR) headphone output

• Both outputs usable simultaneously

• Phase inverter built in at input stage to convert unbalanced signal to a balanced one for superior sound

• Power stage realized by two TPA6120A2 chips

• BLUE ALPS potentiometer for best volume control

• Optionally with wooden side panels

• Available in silver and black

Head Box DS2 B  – High end balanced headphone amplifier

The market for HiFi headphones has been expanding rapidly in the last years. There have been brought out new models and new driver designs. These headphones are able to produce outstanding sound, the amplifiers from which they are fed mostly are mediocre. For example planar magnetic headphones demand more current and simply need more power to be driven to their full potential.

Our new Head Box DS2 B will drive anything with ease as it puts out powerful 1100mW into 33ohms. It has three different current settings to match any headphone type and features four gain settings for high impedance headphones as well as sensitive in ear monitors. The fully balanced dual mono design is completed with a phase inverter to con-vert any unbalanced signal to a balanced one straight at the input. A balanced 4 Pin XLR output on the front guarantees perfect signal transmission to your headphone.

The highly acclaimed Texas Instruments TPA6120A2 chip has been implemented for best possible power handling, which results in superior sound and a near dead silent noise floor. Both outputs on the front can be used simultaneously for shared listening experiences. The Head Box DS2 B is able to adjust to every headphone in your collection: hard to drive dynamics, current hungry planar magnetics and sensitive in ear monitors. Pure pleasure out of one box.

Lisätiedot

Väri

musta, hopea

Voit ottaa yhteyttä alla olevalla lomakkeella tai soittamalla numeroon 03 2130 750. Vastaamme puhelimeen myymälän aukioloaikoina. Tarkista aukioloajat täältä.

    Liittymällä postituslistallemme saat tuoreimmat kuulumisemme suoraan sähköpostiisi. Voit erota postituslistalta milloin haluat.
  • Kenttä on validointitarkoituksiin ja tulee jättää koskemattomaksi.

Output power 2 x 550 mW (in 33 Ohms, both channels driven)

SNR 98 dB (A weighted, full output)

THD +N < 0.02%

Gain (unbalanced) 0, 3, 9,12 dB (no load)

Gain (balanced) 6, 9, 15, 18 dB (no load)

Frequency response 20 Hz – 20 kHz (+/- 0.2 dB)

Analogue Inputs 1 pair RCA/Cinch

1 pair XLR

Headphone output 1 x 6.3 mm (unbalanced)

1 x 4 Pin XLR (balanced)

Analogue loop outputs 1 pair RCA/Cinch

1 pair XLR

Recommended headphone impedances 8 – 600 Ohms

Trigger in/out 12 V

Power supply 18 V / 1A DC

Standby power consumption < 0.5 W

Weight 1461 g (Alu) without power supply