Pro-Ject The Classic Reference

Hinta

4 990,00 (sis. alv)

Tämän tuotteen voit ostaa tai tilata myymälästämme. Kysy lisää, pyydä tarjous, ota yhteyttä!

Pro-Ject-uutuussoitin. Tyylikkään ulkoasun saloihin kätkeytyy The Classic-sarjan vankka rakenne. Tarkka moottorinohjaus ja laadukas aluslautanen, jotka takaavat vakaan pyörintänopeuden. Kelluva runkorakenne. EVO 9 AS HG-äänivarsi laadukkaalla sisäisellä kaapeloinnilla. Irroitettava kelkka SME-kiinnityksellä. Ulostulot RCA-kaapeleille ja balansoidut XLR-lähdöt. Mukana Connect It Phono E-kaapeli RCA-liittimillä. Pianomusta runko ja kiillotettu teräs viimeistelee ulkoasun. Tyylikäs klamppi, nahkainen levymatto ja pölykansi vakiona mukana.

 

The new The Classic Reference combines technical finesse and luxury design like no other turntable. It is based on the The Classic EVO and the experience we gained designing our iconic turntable for the Vienna Philharmonic Orchestra.

Precision motor control. The motor is powered by a DC-driven AC generator which creates a completely clean sine wave to ensure highest speed stability.

The platter is precisely machined out of a special aluminium alloy with a TPE ring on the inside, which offers special damping abilities.

Best speed accuracy. The diamond cut aluminium sub-platter can be machined to much improved and lower tolerances compared to standard plastic sub-platters. It adds more mass to the entire platter and drive system, resulting in additional damping of noise and unwanted resonances.

The sub chassis isolates the platter and tonearm from the resonances of the motor and main plinth. The floating aluminium chassis sits on decoupling TPE damping balls.

The Classic Reference is equipped with our high end precision EVO 9 AS HG tonearm. It uses an inverted cardanic Swiss ABEC 7 quality bearing with 4 stainless steel tips. The bearing sits in a heavyweight aluminium housing, which provides the needed stability. The massive outer ring is open to avoid resonances. For the EVO AS tonearms, we use a special aluminium s-shape tube with the highest internal damping, paired with a SME-type headshell. The inner wiring is made of flexible high-purity copper which is an optimum conductor for the small phono signal.

True Balanced XLR output. The new The Classic Reference offers classic RCA and additional balanced XLR output sockets. The big advantage of a balanced connection is its ability to remove picked up noise and interferences.

Voit ottaa yhteyttä alla olevalla lomakkeella tai soittamalla numeroon 03 2130 750. Vastaamme puhelimeen myymälän aukioloaikoina. Tarkista aukioloajat täältä.

    Liittymällä postituslistallemme saat tuoreimmat kuulumisemme suoraan sähköpostiisi. Voit erota postituslistalta milloin haluat.
  • Kenttä on validointitarkoituksiin ja tulee jättää koskemattomaksi.
Speed: 33, 45 (78) RPM (electronic speed change)
Drive principle: Belt drive
Platter: 300 mm aluminium with TPE damping ring
Mains bearing: Stainless steel
Wow & flutter: 33: ±0.03 % 45: ±0.04 %
Speed variance: 33: ±0.08 % 45: ±0.10 %
Signal to noise: 73dB
Tonearm: EVO 9 AS HG
Effective arm length: 230 mm
Effective arm mass: 24.2 g
Overhang: 18 mm
Included accessories: 15 Volts DC / 0.8 A power supply, dust cover, Leather it, Clamp it
Power connection: 110/120 or 230/240 Volt – 50 or 60 Hz
Power consumption: 5 Watt max / < 0.5 Watt standby
Dimensions: 460 x 131 x 351 mm (WxHxD) lid closed