NAD C379

Hinta

1 199,00 (sis. alv)

Toimitusaika: 2 viikkoa tai enemmän

NAD-uutuusvahvistin, jossa mm.modulipaikka MDC2 BluOS-D modulille. Se pitää sisällään verkkosoittimen, Dirac-huonekorjauksen sekä monihuonemahdollisuudet. Teho 2x80W jatkuva ja 2x120W musiikki. ESS Sabren DA-muunnin. Monipuoliset liitännät – mm.HDMI eARC ja MM-levysoitintulo. Kauko-ohjain.

 

  • Customized HybridDigital UcD amplifier in fully balanced bridged configuration
  • Continuous Power: 80 Watts per channel into 8/4 ohms, bridgedable up to 300W
  • Dynamic Power: 2x120W into 8 ohms
  • Vanishingly low harmonic and intermodulation distortion
  • Nearly unmeasurable noise through the entire audioband
  • Dual MDC2 ports for expanded functionality
  • Optional MDC2 BluOS-D module adds BluOS Hi-Res multi-room music streaming and Dirac Live room correction
  • Jitter-free 32-bit/384kHz ESS Sabre DAC
  • Ultra-low-noise MM phono stage with infrasonic filtering circuitry
  • Two optical, two coaxial digital inputs
  • HDMI-eARC input
  • Two pairs of line-level analogue inputs with ultra-low-noise buffer amplifiers
  • Two sets of speaker outputs
  • Two-way Qualcomm aptX HD Bluetooth
  • Dual subwoofer outputs, Pre Out
  • Dedicated headphone amplifier
  • CI-Friendly – IR remote, 12V Trigger in/out, IR in/out, RS-232 Serial port
  • Seamless integrations with smarthome control systems such as Control4, Crestron, RTI, URC, Lutron, and Elan

MAXIMUM POWER AND PERFORMANCE

Every detail of the C 379 amplifier design has been refined for maximum performance. Starting with a customised version of the proven HybridDigital UcD output stage, the C 379 operates in a fully balanced bridge configuration. This allows for massive power with nearly immeasurable distortion and noise in the audible range. The power supply is capable of 80 watts continuously and over 120 watts instantaneously to allow for short-term musical transients. For even greater power, the C 379 can be bridged in mono with the C 268 to provide up to 300 watts per channel of distortion-free sound.

BRILLIANT MUSICALITY AND DETAIL

The C 379’s digital architecture is built around the critically acclaimed ESS SABRE® ES9028 DAC, one of the industry’s highest performance 32-bit digital-to-analogue converts with unprecedented dynamic range and ultra-low distortion. It provides ultra-high-quality music playback, free from clock jitter common in digital audio systems. The results are an exceptionally wide dynamic range, ultra-low distortion, accurate sound stage and unparalleled clarity.

FUTURE-PROOF FLEXIBILITY

Since 2006, NAD has led the way in providing users the flexibility to add features as new A/V technologies are introduced to provide unparalleled performance and value. Now, with the second generation of NAD’s Modular Design Construction (MDC) technology, the C 379 is in a class of its own. It features two MDC2 slots for upgrading the amplifier’s capabilities with emerging A/V technologies and additional features, including BluOS® high-resolution multi-room streaming and Dirac Live Room Correction.

THE POWER OF BLUOS

With the available MDC2 BluOS-D module, Dirac Live, BluOS, Apple AirPlay 2, two-way aptX® HD Bluetooth, and more, can be added to the C 379. With BluOS, the C 379 can be connected to a home network via Wi-Fi or Ethernet to experience the most advanced multi-room wireless music management system with 24 bit/192kHz resolution. Controlled through the BluOS app for smartphone, tablet, or desktop, BluOS manages your digital music collection and connects to over 20 high-quality streaming music services including Tidal, Deezer, Qobuz, Amazon Music, Spotify, and more.

CONNECT EVERYTHING

The C 379 is well equipped with a variety of analogue and digital connectivity options including aptX HD Bluetooth, HDMI eARC, MM Phono stage, and two subwoofer outputs. aptX HD can easily support 24-bit streaming from any Bluetooth enabled device, while HDMI eARC allows you to connect the C 379 to your TV and provide seamless control from your existing remote. It also includes a built-in high-performance headphone amplifier with low output impedance and high output voltage capability, allowing it to drive a wide range of headphones.

Voit ottaa yhteyttä alla olevalla lomakkeella tai soittamalla numeroon 03 2130 750. Vastaamme puhelimeen myymälän aukioloaikoina. Tarkista aukioloajat täältä.

    Liittymällä postituslistallemme saat tuoreimmat kuulumisemme suoraan sähköpostiisi. Voit erota postituslistalta milloin haluat.
  • Kenttä on validointitarkoituksiin ja tulee jättää koskemattomaksi.

Preliminary Specifications

LINE INPUT, PRE-OUT (ANALOG BYPASS ON)

  • THD (20Hz – 20kHz)
  • <0.002 % at 2 V out
  • Signal-to-Noise Ratio
  • >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
  • Channel separation
  • >100dB (1 kHz); >90 dB (10 kHz)
  • Input Impedance (R and C)
  • 56 kohms + 100 pF
  • Maximum input signal
  • >4.6 Vrms (ref. 0.1 % THD)
  • Output impedance
  • Source Z + 320 ohms
  • Input sensitivity
  • 65mV (ref. 500 mV out, Volume maximum)
  • Frequency response
  • ±0.3 dB (20 Hz – 20 kHz)
  • Maximum voltage output -IHF load
  • >>5 V (ref. 0.1 % THD)

PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)

  • THD (20Hz – 20kHz)
  • <0.01% at 2 V out
  • Signal-to-Noise Ratio
  • >84dB (200 ohms source; A-weighted, ref. 500 mV out)
  • Input sensitivity
  • 46 kohms/100 pF
  • Frequency response
  • ±0.3 dB (20 Hz – 20 kHz)
  • Maximum input signal at 1kHz
  • >80 mVrms (ref. 0.1 % THD)

LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)

  • THD (20Hz – 20kHz)
  • <0.005% at 1V out
  • Signal-to-Noise Ratio
  • >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
  • Frequency response
  • ±0.3 dB (20 Hz – 20 kHz)
  • Channel separation
  • >62 dB at 1kHz
  • Output impedance
  • 2.2 Ohms

LINE IN, SPEAKER OUT (ANALOG BYPASS ON)

  • Continuous output power into 8 ohms and 4 ohms
  • 2 x 80W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
  • Continuous output power into 8 Ohms (Bridge mode)<s/trong>
  • 300W (ref. 20 Hz – 20 kHz at THD 0.03%)
  • THD (20 Hz – 20 kHz)
  • <0.03% (250 mW to 80 W, 8 ohms and 4 ohms)
  • IHF dynamic power
  • 120W into 8 ohms
  • 200W into 4 ohms
  • 250W into 2 ohms
  • Peak output current
  • >26A (in 1 ohm, 1ms)
  • Damping factor
  • >150 (ref. 8 ohms, 20Hz to 6.5kHz)
  • Frequency response
  • >±0.3 dB (20 Hz – 20 kHz)
  • Channel separation
  • >90dB (1 kHz)
  • >75dB (10 kHz)
  • Input sensitivity (for 80 W in 8 ohms)
  • Line In: 201 mV, Digital In: 10.25% FS

GENERAL SPECIFICATIONS

  • Supports bit rate/sample rate
  • up to 32 bit/384 kHz
  • Frequency band
  • 2.402GHz- 2.480GHz
  • Maximum transmit power (dBm)
  • 7 dBm ± 2 dBm

DIMENSIONS AND WEIGHT

  • Gross dimensions (W x H x D)
  • 435 x 100 x 390mm (17.1 x 3.9 x 15.4“)
  • Net Weight
  • 8.7kg (19.1lb)
  • Shipping weight
  • ~11kg (24.2lb)